Rollz Motion Guía de usuario descargar pdf (Pagina 20)

Backrest Rollz wheelchair

In order to ensure maximum comfort, it is important to adjust the straps in the

back of the wheelchair package. To do so please follow the next three steps:

a. Remove the footrests from the wheelchair bag and make sure the back

of Rollz wheelchair package is extracted (see: page 46).

b. Loosen the Velcro at the back of the wheelchair package by pulling the

bag upwards.

c. Adjust the straps by loosening the Velcro. Adjust the straps in a way that

allows the pelvis of the user to be upright and makes sure the user‘s

back is properly supported.

Folding the wheelchair package

a. Remove the armrests and place them in the wheelchair bag.

b. Slide the footrests up until released from the footrest holders. Put them

back into the luggage bag for the Rollz wheelchair package.

c. Turn the adjustment knobs for the handles anti-clockwise and turn the

handles around via the outside, until they are pointing towards the

front. Adjust the height for yourself and turn the adjustment knobs

clockwise to tighten (See: adjusting/posture).

d. Hold the handle of the wheelchair package and push the backrest

forward until halfway up the frame. Next, push the backrest backward

and down until it fits against the seat.

After folding away the Rollz wheelchair function, you can leave it on the Rollz

Motion while you walk. In that case, you will walk behind the Rollz Motion.

Disengaging the Rollz wheelchair package

a. Pull the red handle up without any force.

b. Hold the handle of the Rollz wheelchair package and pull it up without

any force.

c. Then push the red handle down again.

1 2 ... 15 16 17 18 19 20 21 22

Sin comentarios

Rollz Motion Guía de usuario Pagina 20